Analogue Addressable Control Panel
MX-4200 
Features
- Fully expandable from 1 to 2 loops via common plug in loop driver boards.
- Full support of Apollo (Discovery, XPlorer, S90 and XP95) and Hochiki ESP Protocols.
- Advanced graphical LCD user interface, with up to 250 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
- 4 Amp (90-265V, 47-63Hz) power supply and charger to EN54 part 4.
- Dedicated RS232 serial port for direct PC, modem or external printer connection.
- Duel, flashed-based, microprocessor technology with on-board real-time clock
- Optional on-board or remote printer.
- Installer friendly 'auto-learn' facility for uncomplicated trouble-free, commissioning and fault finding.
- Fully programmanle on site via on-board alphanumeric keypad or PC configuration tools.
- Dedicated system and navigation keys for simple user control.
- User-friendly Windows-based PC-NET configuration software includes virtual diagnostics functionality via a low-cost modem connection.
- Powerful cause and effect programming coupled with flevible 'Dynamic' zoning makes the panel suitable for a wide range of system applications including the most complex multi area systems.
- Programmable variable sensitivity (day/night) modes with multiple 7-days timers.
- The panel supports (protocol dependant)automatic contamination warning, sensitivity band selection and rapid drift compensation.
- Robust removal equipment chassis with plug-in connectors for simple fixing and cable termination.
- When connected to the fault-tolerant Ad-Net Network, the panel operates as a true peer-to-peer interface (with up to 1000 shared zones) with full cross-panel reporting, control and cause and effect functionality
- Flash memory and the advanced graphical display enable the panel to be configured to operate in virtually and language with any character set, and allows the installer's logo and company details to be applied to the LCD display.
- Optional LED expander boards and enclosure options for despoke applications.
- The powerful 'Trace' diagnostic features enables highly accurate device monitoring with event tracing and load monitoring of all loop, sounder and auxiliary outputs.
Specification
| PROPERTY | VALUE |
| Base Technology | Dual flash-based processors with real time clock, 'Trace' diagnostics, 'Pulse' communications and programmable languages. |
| Display | Backlit 240 x 64 hraphical LCD |
| LED Indicators | 3 red (2 x fire, 1 x alarm), 1 green (power) and 12 amber (fault and system) |
| Controls | Alphanumeric keypad, navigation keys and system keys for reset, mute, silence/resound and evacuate. |
| Protocols | Hochiki ESP, Apollo S90, XP95, Discovery and XPlorer. |
| Number of fire zones | 1000 'Dynamix' (200 per individual panel) |
| Number of loops | 1 to 2. Expandable via individual plug-in loop driver. |
| Devices per loop | As per detector manufacturer's specifications |
| Loop current | 500 mA per loop |
| On-board sounder circuits | 2 x 1 Amp (programmable) |
| On-board relays | 2 x 1 Amp 30v AC/DC (programmable) |
| Auxiliary supply | 1 x 24v 300 mA |
| Open collector outputs | 8 x programmable (via optional 8-way relay card) |
| Programmable switch inputs | 8 volt-free digital inputs (via optional 8-way input card) |
| On-board power supply | 4 Amp high-efficiency switched-mode |
| Mains supply | 110 - 230v AC (+10%, -15% tolerance) 50/60 Hz 1.9 Amp |
| Battery capacity | 24v 18 Ah internal. 24v 48Ah external |
| Charger current | 2.0 Amp DDP monitored, temperature compensated integral charger |
| Serial ports | 1 RS232 on-board for PC, modem or external printer. |
| Programming | Via on-board keypad or PC running Windows tools. |
| Event log | 1000 fire and event + diagnostic |
| Networking | Optional plug in network card |
| Printer(optional) | Optional on-board or external serial printer |
| Enclosure | Steel IP40 |
| Cable entry | 20mm knock-outs. 18 x top, 9 x top rear and 2 x bottom |
| Colour | Beige (textured) |
| Size H x W x D mm | 475 x 450 x 115 |
| Weight | 10.5Kg |
| Metalwork options | Flushing bezel, battery box and a range of special finishes including stainless steel, brass and chrome |
| Standards | Designed to comply with EN54 parts 2/4 |
| Battery capacity | 24v 18 Ah internal. 24v 48Ah external |
*As out policy is one of constant product improvement the right is therefore reserved to modify product specifications without prior notice.
Designed by Philip Smurthwaite
We sell and perform the following services: - fire alarms, fire alarm company, fire alarm contractor, fire alarm panel, fire alarm system design, fire alarm service, fire alarm design
